Important Steps for Installing a New Shower Unit

Important Steps for Installing a New Shower Unit

Blog Article

Call

Have you been searching for info around How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment requires mindful planning and a great deal of job. For the most part, you will need to do 3 types of tasks: framing wall surfaces, setting up the plumbing, and ending up wall surfaces.

Prep work

First of all, you need to decide on the kind of shower that you want to set up. It is essential to establish whether the chosen shower can handling particular systems as well as can manage a secure degree of water with the central heating boiler. A lot of shower devices nowadays are created to be adaptable to different water pressures (such as stored hot water as well as cool mains).
It is additionally essential to take into account the water stress as well as the preparation of the piping and drain for the shower

Various Sorts Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower unit can be attached to the bath faucet as per your need, and also the water temperature can be changed using the taps. Push-on mixers are cheap and exceptionally straightforward to mount. Nevertheless, although the pipe link is simple, it is quickly displaced. Furthermore, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The pipe and spray of this sort of shower are combined with a bath mixer faucet, and the temperature level can be adjusted with the bathroom taps. It is a very low-cost choice and no additional plumbing is entailed. Nonetheless, the bath/shower mixers additionally deal with bothersome temperature control options.

Guidebook Mixer: The pipe as well as spray of a hands-on mixer shower device belong of the wall unit and the hot and cold water materials are linked to a solitary shutoff The temperature and also stress of the water are controlled via either one or a selection of knobs (in more costly showers). Although temperature control is much easier in manual mixer kinds, they are more pricey than the previously discussed mixers. They additionally call for extra plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall surface system as well as the hot and cold water supplies are attached to a solitary shutoff here also. It is total with a built-in stabiliser to self-adjust the water temperature as well as to avoid it from ending up being also hot. One of the most significant benefits of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most costly of the various mixer choices.

Power Shower: A power shower is a solitary system having a powerful electrical pump that is capable of changing both the water pressure as well as temperature. This type of shower can be fitted if there is water system from a cold water tank as well as a warm water cylinder. A power shower makes the change of both stress and temperature level simple. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix boiler under mains stress.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats the water electrically. It is essential to keep in mind that for this shower kind to be set up, the mains pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature and stress to be changed via a knob. Models with temperature stabilisers are better as they stay untouched by various other faucets in other places in use within the household. A significant downside of electrical showers is that the control knob just enables the option of high temperatures at less stress, or lower temperatures at a better stress. This is troublesome in the winter when the spray is often weak as well as the mains water is colder. Nonetheless, this trouble is tackled in some designs which are offered with a winter/summer setup.

Method

Depending on the kind of shower you desire to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Prior to beginning, it is a good idea to mark the placements of the shower head and also control, and also to plan the pipe-work entailed. Furthermore, the water drainage system to remove the drainage will need to be prepared. Both settings of the cable television route and the shower button will also require to be taken into consideration if an immediate or electrical shower device is being installed.
Make use of the direction overview given with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to remove the water. In order to secure the pipes, they ought to be given a waterproof covering and additionally fitted with isolating shutoffs. The pipes can then be buried right into the wall as well as plastered over to neaten the total look.
Fit the base tray, shower head, and fittings.
Attach the main shower control to the pipelines that will be providing the water (This might call for a women screw thread adapter).
Reconnect the water as well as examination the pipes for any leaks, as some may require tightening up.
If you are mounting an electrical shower, keep in mind to turn off the electrical power supply prior to making any kind of electric connections. When these connections have actually been made (there must be guidance within the instruction manual), the power supply can be switched over back on.

Readjusting Water Stress to Fit Your Shower

The cold water storage tank can be lifted to a higher elevation (in some cases just 150mm (6inches)) by installation a strong wood support under it - possibly composed of struts and also blockboards. If you select this option, the major and also distribution pipes will likewise have to be elevated to fulfill the brand-new elevation of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it must be attached into the power supply in order to run.

Piping and Water drainage

It is best to use 15mm diameter supply pipes, and also make the go to the shower as brief and also straight as possible so regarding maintain maximum pressure and also reduce heat loss. In addition, by reducing making use of arm joints for pipe edges, you can lower the resistance in the flow of the water. You can accomplish this by bending the pipes rather.

A Lot Of Common Blunders

Breaching or ignoring regional code limitations.

Using pipelines that are also little.

Connecting copper to galvanized without making use of a brass or dielectric suitable in between the two.

Not making use of tape or pipe compound at threaded joints.

Not leveling your components when installing them.

Not setting up an air void filling up for components.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the completed wall is in area.

Not appropriately lining up tubes right into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.).

When transforming the water back on in your home, always run the outdoors hose valve or purge your bathrooms to bleed dirt and air from the lines. This particles can cause troubles in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We hope you liked our article on How to Install a Direct-to-Stud Shower Enclosure. Thanks a lot for finding the time to browse our content. So long as you liked our blog post plz make sure you remember to share it. Thanks so much for taking the time to read it.

Free Quote

Report this page